Oxtail Wonton Soup (Oxtail is Sous-vide)

-

 

Comments

Post a Comment

Popular posts from this blog

Curing Notes and some Math

-
Image
(OP-2016) I wrote this up to help you with some of my recipes. I hope these notes and links expand your knowledge of curing.  My recipes are straightforward to follow if you use the info given below. Replicating my recipes is possible because I use percentages for everything. The weight of meat plus fat is 100%, and all ingredients to be added are expressed as a percentage of the weight of the meat plus fat.  Percentages can be used to standardize recipes regardless of batch size, and all weights are metric. An online calculator is provided below.  No weights are given because the weights of meats vary. Again everything is a percentage of the meat's weight after trimming. Here is an example- Meat weight,  2393  grams, and we want to find out the amount of salt we need in grams-  2393 * 3.5%=83.755 or 2392/100 * 3.5 =83.755 grams. Or 2393 * .035 = 83.755 For most of my recipes, I use  .25%  c...
Read more

Eye-of-Round (Sous-Vide)

-
Image
EYE OF ROUND- EOR  (OP- 5/2017)I've been wanting to do this for a while but prefer other cuts for roast beef (I still do). Anyhow, after reading all the pontificating posts on E-O-R, I wanted to see what all the hype was about. After making about 5 of these E-O-R's, I have dialed in what I believe is the perfect temp and time.  The T/T was selected because it provides the highest moisture retention, texture (tenderness) for slicing using a Deli-Slicer. If you plan on slicing by hand or wanted to slice very thick to serve as an entree it might not work. The E-O-R will be cooked at 128f for 24 hours and sliced on my Berkel Slicer.  (Disclaimer located at the bottom for T/T). Note: The T and T are perfectly fine. The Log Reduction is exceeded 12.  If you plan on purchasing the E-O-R at Costco or another whole seller, I will suggest buying it cryo-vacuumed-sealed. If you don't, there's a possibility that it was mechanically tenderized. I'm not against...
Read more

Determining The Alcohol Content Of Your Liqueur

-
The work of Kurt Keydel  and a slight edit by me....... As you begin experimenting with making your own liqueurs, you’ll invariably run up against the “what percentage of alcohol is this?” question. It can be tricky. You can measure the amount of alcohol in a pure base spirit by measuring its specific gravity. This is done with a hydrometer (found in all home brewing supply shops). Once a spirit is diluted with anything besides distilled water, the reading will lose accuracy – all bets are off. You can no longer use a hydrometer to measure the concentration if you’ve added any sugar or any other soluble substance to your base spirit. It won’t be anywhere close to accurate. In calculating the alcohol content of your creation, you must always begin with the alcohol content (Weight of the Alcohol) of the base ingredients. If you don’t have that, you will not be able to compute your alcohol content. Sure, you could take a stab in the dark by lighting your creation (a concentration will...
Read more